Get Answers to your Appliance Repair Questions

Disclosure: This website contains affiliate links, Meaning I get a commission if you decide to make a purchase through my links, at no cost to you.

Your Privacy Rights

Washer Parts  ·   Dryer Parts  ·   Refrigerator Parts  ·   Dishwasher Parts  ·   Range/Cooktop/Oven Parts  ·   All Appliance Parts 

Author Topic: Sometimes oven stops baking and shows F-10  (Read 2976 times)

Offline 56308

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 1
Sometimes oven stops baking and shows F-10
« on: July 11, 2012, 09:33:47 PM »

Frigidaire built in oven
Not all the time, but sometime when I bake it will shut itself off and show a F-10.
I have to turn the circuit breaker off and back on to get it working again.
What should I check or replace first?

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10998
  • Country: us
    • - Appliance Repair
Re: Sometimes oven stops baking and shows F-10
« Reply #1 on: July 12, 2012, 08:05:44 AM »
The most common problem that would cause this to happen would be a bad temperature probe.
Your model oven uses Temperature Probe Part # 316217002

A bad connection between the temp probe and oven control/clock could also cause a F-10 error.
If you don't find any bad connection and after you replace the temp probe it still happens then chances are you have a problem with the oven control/clock.

Your model oven use Control/Clock Part # 316418720

I would start by checking for bad connection. Then if you have a ohm meter you can check the continuity on the temp probe.
It should read around 1100 ohms at room temperature. Being this does not happen all the time the temp probe may check ok with a meter, but still be the cause of the problem.