Author Topic: Advantium microwave smart board replacement help needed (Read 15444 times)

kludge · « **on:** June 13, 2012, 01:14:41 PM »

I'm replacing my smart board... but the photos of the WB27X10776 (which the GE site says is the correct part for my model) look different than my board. Mine has more connectors and relays. Does the replacement board ship with adapter(s) or an instruction sheet that explains how to install it in place of previous versions of the board?

AJ · « **Reply #1 on:** June 13, 2012, 01:20:31 PM »

GE Microwave Smart Board Part # WB27X10776

The above board looks different then yours?

Quote

Does the replacement board ship with adapter(s) or an instruction sheet that explains how to install it in place of previous versions of the board?

When you click on the photo or part number above it will take you to the parts page.
It does not show that it comes with instructions or adaptors so I would have to say no it don't come with it.

Maybe the replacement part is used in more then one model and has other plugs on the board for the different models.

What is the model number of your microwave?

kludge · « **Reply #2 on:** June 13, 2012, 01:54:34 PM »

Here's what mine looks like:

Seems I may have leftover plugs.

Main thing concering is the second large black relay labeled Lower Heater on the replacement board. That relay is present on my current sub PCB, but not on the Smart Board. Not sure if this will work or not. I went ahead and ordered it. I guess we'll see...

kludge · « **Reply #3 on:** June 13, 2012, 01:55:33 PM »

Oh... and my microwave is SCA1001KSS01

AJ · « **Reply #4 on:** June 13, 2012, 03:08:03 PM »

Quote from: kludge on June 13, 2012, 01:55:33 PM

Oh... and my microwave is SCA1001KSS01

Just check the part number and you are correct, it's part # WB27X10776

Quote

Not sure if this will work or not. I went ahead and ordered it. I guess we'll see...

Let us know...

RegUS_PatOff · « **Reply #5 on:** June 14, 2012, 08:14:16 AM »

Quote from: kludge on June 13, 2012, 01:54:34 PM

Here's what mine looks like:

are you sure yours isn't 220v SCA2000

kludge · « **Reply #6 on:** June 14, 2012, 10:36:08 AM »

Yes it is a 220V...but the sticker inside the door says SCA1001. So THATS the problem. GEeeeeze...

RegUS_PatOff · « **Reply #7 on:** June 14, 2012, 01:55:08 PM »

GE® imagination at work

kludge · « **Reply #8 on:** June 16, 2012, 08:06:59 AM »

Well I got the correct board in today and installed it...but still no microwave

Again, everything works fine but the magnetron does not come on. The problem began after a lightning storm, and though we didn't lose power we may have had some surges.

Any ideas? What components, other than on the smart board, could have been damaged?

kludge · « **Reply #9 on:** June 16, 2012, 08:42:45 AM »

Additional info: I checked the outlet and it's getting 220v. When I start the microwave I hear a relay click after a second or two, but not the usual hum I hear when the magnetron is on.

AJ · « **Reply #10 on:** June 16, 2012, 08:57:10 AM »

I have never worked on a 220 Volt microwave.
Is this microwave in your home or is this a commercial unit that is in a restaurant or something?

RegUS_PatOff · « **Reply #11 on:** June 16, 2012, 09:08:23 AM »

Quote from: AJ on June 16, 2012, 08:57:10 AM

Is this microwave in your home or is this a commercial unit that is in a restaurant or something?

made for home use.
Just faster and bigger Quartz Halogen cooking lamps
Prior to GE's Tri-vection series
I had one I bought used on eBay.
We didn't like the Advantium controls, too complicated for us and the kids..

kludge · « **Reply #12 on:** June 16, 2012, 09:09:46 AM »

It's in my home....way out in the country, else I would call a repairman. If I can simply diagnose the failed part, I can replace it. I downloaded service manual 31-9038, but it really doesn't show any detailed diagnostic procedures.

RegUS_PatOff · « **Reply #13 on:** June 16, 2012, 09:15:35 AM »

what's it not doing ?

kludge · « **Reply #14 on:** June 16, 2012, 09:23:02 AM »

Microwaving. The convection heaters are working, as are the fans, the turntable, lights, controls...everything except it appears the magnetron isn't functioning. If I could be sure that it's a bad magnetron, and not just a sensor or thermal cut-out, then I would replace it. If only I could find a manual that had detailed diagnostics I could probably track down the problem.

By-the-way...I really appreciate you guys taking the time to consult with me on a Saturday morning...

tgoods · « **Reply #15 on:** June 16, 2012, 11:14:11 AM »

Check the primary side of the HV transformer for voltage. Since this is a 240 vac microwave, I don't know if you should read 120 vac or 240 vac to the transformer. But, it should read one or the other. If no voltage, the problem is on the low voltage side; fuse, control board, tco or door switch. If there is voltage, the problem is on the high voltage side; HV transformer, HV capacitor, HV diode or magnetron.

kludge · « **Reply #16 on:** June 16, 2012, 11:57:23 AM »

Excellent guidance, Tgoods... that's exactly the kind of advice I'm needing.

Checking those voltages with the smart board connected will be pretty difficult though, with 10 cables in the way. Can I disconnect the smart board and still get accurate readings off the transformer?

RegUS_PatOff · « **Reply #17 on:** June 16, 2012, 01:20:18 PM »

have you tested the HV Diode and the HV Capacitor ?

tgoods · « **Reply #18 on:** June 16, 2012, 01:54:23 PM »

Is there a tech sheet? GE usually has it stashed around the control board somewhere. I downloaded the same manual you did but it's for the 120v Advantium not 240v. I did a reverse lookup on the HV transformer and it only fits the 240v Advantium models. So, I assume the transformer primary voltage should be 240 vac. If I had a schematic, I could give better advice.

kludge · « **Reply #19 on:** June 17, 2012, 08:54:24 AM »

Here it is. It appears that the Interlock Monitor Switch is in a very important location. I guess it should be the first thing I check.

Get Answers to your Appliance Repair Questions

Parts & Diagrams

Author Topic: Advantium microwave smart board replacement help needed (Read 15444 times)