ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: brothermal on May 16, 2012, 11:16:49 AM

Title: kenmore washer spins very slowly
Post by: brothermal on May 16, 2012, 11:16:49 AM
I am working on kenmore model 11023832100 .In the spin cycle the machice spin very slowly. I have changed the drive coupling now the agitator snips when the basket should be. any ideas? does any one have a service manual for this machine? thanks guys!
Title: Re: kenmore washer spins very slowly
Post by: brothermal on May 16, 2012, 11:20:18 AM
Sorry that should have read the agitator spins when the basket should be spining
Title: Re: kenmore washer spins very slowly
Post by: JWWebster on May 16, 2012, 11:29:52 AM
You must have a bad clutch.
Title: Re: kenmore washer spins very slowly
Post by: brothermal on May 16, 2012, 11:44:29 AM
how difficult is that to repair ?
Title: Re: kenmore washer spins very slowly
Post by: JWWebster on May 16, 2012, 12:57:18 PM
Not very hard at all. Remove the agitator ten remove the pump and motor. Get the tranny out. Inspect the clutch band by removing it from the housing with a pair of pliers. Squeeze the spring to release the clutch band.
Title: Re: kenmore washer spins very slowly
Post by: AJ on May 16, 2012, 01:14:24 PM
Here is the clutch for your model.

Clutch Assembly Part # 285785



Title: Re: kenmore washer spins very slowly
Post by: AJ on May 16, 2012, 01:19:24 PM

does any one have a service manual for this machine? thanks guys!


Your washer is a direct drive washer manufacture by Whirlpool for Sears.
The closest thing you will find for a service manual would be this one.


L-55 Whirlpool Made Direct Drive Washer Service Repair Manual (http://appliancejunk.com/forums/index.php?action=store;sa=view;id=72)
Title: Re: kenmore washer spins very slowly
Post by: luck on June 02, 2012, 07:31:10 PM
if your basket is not spinning pull the ajatator and check the nut on the basket which tightens up a drive block that sits on the basket drive