ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: wraithseeker on January 01, 2012, 02:20:13 PM

Title: LG WM0642HW IE Error
Post by: wraithseeker on January 01, 2012, 02:20:13 PM
Was getting IE error. Cleaned inlet filters and still getting error. Seems like water is not flowing and there is a humming noise at the inlet valve assembly. Thanks


Model WM0642HW (http://www.appliancepartspros.com/partsearch/modelsearch.aspx?model=WM0642HW)
Title: Re: LG WM0642HW IE Error
Post by: JWWebster on January 01, 2012, 03:45:22 PM
IE: Water level  (246) was not reached in 8 minutes. Probably a bad water valve.
Title: Re: LG WM0642HW IE Error
Post by: whirlpooltech on January 01, 2012, 03:50:56 PM
IE: Water level  (246) was not reached in 8 minutes. Probably a bad water valve.

Or the screens are plugged up and need to be cleaned.
Turn the water off, remove the hot and cold water inlet hose from the back of the washer and look inside the valve.
Is there any junk in there or is it clean looking?
Title: Re: LG WM0642HW IE Error
Post by: wraithseeker on January 02, 2012, 11:27:18 AM
After further checking there was a y-connector as the water source that was completed plugged.  Thanks for the suggestions!
Title: Re: LG WM0642HW IE Error
Post by: whirlpooltech on January 02, 2012, 05:51:01 PM
 O0