ApplianceJunk.com

Forum Index => Dryer Repair => Topic started by: JWWebster on August 25, 2011, 03:02:01 PM

Title: 29" GAS DRYER
Post by: JWWebster on August 25, 2011, 03:02:01 PM
How do you get into this machine? Any instructional vids out there? I think Jumpy was recently working on one and needed a manual? Thanks in advance

Model MGDE300VF0
Title: Re: 29" GAS DRYER
Post by: niobrara on August 25, 2011, 08:24:19 PM
Where are you trying to get to Jw.
Title: Re: 29" GAS DRYER
Post by: JWWebster on August 26, 2011, 12:06:29 AM
My friend on line says it is thumping. Sound like a wheel to me
Title: Re: 29" GAS DRYER
Post by: niobrara on August 26, 2011, 10:02:06 PM
Check the blower
Title: Re: 29" GAS DRYER
Post by: tgoods on August 26, 2011, 10:34:05 PM
Remove the two screws in the back of the top.  Push the top back and up. Remove two screws from the top of the console.  Pull the console up, remove the two plugs from the control board.  Remove the screws from the four corners of the front. Open the door and remove two screws from below the lint screen. From there it's easy.  I'm going from memory so there might be a screw or two I missed.
I just had one where they ignored the thumping for so long a piece broke of their drum. Those drums are paper thin, check it for cracks.