ApplianceJunk.com

Forum Index => Dryer Repair => Topic started by: 91boz on June 22, 2011, 10:20:31 PM

Title: Adhesive For Dryer Door Seal?
Post by: 91boz on June 22, 2011, 10:20:31 PM
The door seal on my Whirlpool dryer fell off. What type of adhesive should I  use to refasten it to the door?

Model LER5634
Title: Re: Adhesive For Dryer Door Seal?
Post by: AJ on June 22, 2011, 10:22:39 PM
This is some good High Temp Adhesive (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252FAppliance-Parts%252Fwhirlpool-high-temperature-adhesive-item-number-ap4284239.aspx), very sticky stuff.
Title: Re: Adhesive For Dryer Door Seal?
Post by: 91boz on June 23, 2011, 12:57:31 AM
Thanks AJ! I used some high temp silicon to apply the door seal. If that fails I will get the adhesive.

 :)
Title: Re: Adhesive For Dryer Door Seal?
Post by: 91boz on June 23, 2011, 01:32:21 AM
Just curious but how do I remove the bottom front panel if I need to replace the belt or remove the drum? Thanks again in advance.
 ???
Title: Re: Adhesive For Dryer Door Seal?
Post by: AJ on June 23, 2011, 06:21:51 AM
This video shows you to disassemble two different style whirlpool dryers. I believe your model is like the one in the video with the access panel on the bottom.

http://www.youtube.com/watch?v=wuP7o10SOG8