Forum Index => Refrigerator & Freezer Repair => Topic started by: JPG on June 08, 2011, 04:22:05 PM

Title: Dispensor front
Post by: JPG on June 08, 2011, 04:22:05 PM
HI I need to replace the solinoid on the ice door, so I tried to remove the outer trim piece but it is not removable so it is now broken, all the other ge trim pieces for the dispensoer area pop on and off. So I still dont know how you are supose to get in there?????? or put the trim piece back????   Help !!!!!!!!!!  jpg


Title: Re: gss25sgmdbs
Post by: JWWebster on June 08, 2011, 06:34:24 PM
Here's one way it is done: servicing the dispenser of the late model GE ice Box (

Well that is for a different style monogram type model. I do have the GSS service manual:

GSS service manual (
Title: Re: gss25sgmdbs
Post by: tgoods on June 08, 2011, 10:00:24 PM
There are three tabs at the bottom of the dispenser control panel.  Push those tabs up with a small phillips screwdriver while pulling out from the bottom.  From there it's easy. 
From looking at the diagram, it looks like you have to completely disassemble the door to replace the dispenser trim.  Some of these doors are foamed in place.  Look behind the door gasket. If you don't see any screws, you're screwed.  You have to buy the whole door to replace your broken trim.