ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: JWWebster on February 21, 2011, 08:41:54 PM

Title: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 08:41:54 PM
Today my buddy Larry brought a Crosley washer down here to the swamp. The cust complaint was a leak. Well I added a little bit of water to the machine while I had it on the fabulous 550 pound AJ appliance rack and I looked fer leaks. Could not find any so I moved her to the awesome test stand. I connected water and power and let her fill all propah. About midways up that thar leak was discovered.
Tub and seal kit (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=93887.1&type=10&tmpid=2111&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252Fpart_details.aspx%253Fpart_id%253D4025154%2526pn_%253D21002237)
 
I took pictures yall... O0

Model CW5500w (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252Fpartsearch%252Fmodel.aspx%253Fmodel_id%253D5168547&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252Fpartsearch%252Fmodel.aspx%253Fmodel_id%253D5168547)



Part # 21002237 (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237) Tub & Seal Kit, AP4025154 (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237)

(http://appliancejunk.com/images/ordernow.gif) (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237)
(http://www.appliancepartspros.com/partpic/Z3BqLjBfbXNfNzMyMjAwMTIvTFBXL3NvdG9ocHRyYXAv.jpg) (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252FAppliance-Parts%252Fwhirlpool-tub---seal-kit-item-number-ap4025154.aspx%253Fpn_%253D21002237)
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 09:35:38 PM
Leaky Crosley Washer:

Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 09:36:53 PM
Deeper into it:
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 09:38:33 PM
Lil Mo
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 09:40:45 PM
I put er all back together tomorrow  O0
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 21, 2011, 09:45:35 PM
Miscellaneous photos
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 21, 2011, 10:59:55 PM
Great post JW and awesome photos! Your getting good with that camera.  O0
Title: Re: Let me show yall what I been up to today
Post by: tgoods on February 22, 2011, 09:42:54 AM
I hope you charged more than $20.  :)
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 22, 2011, 02:26:55 PM
More from the swamp
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 22, 2011, 02:28:58 PM
She runs beautimous and no leaks. Forgot to take anymore pictures dang it. I forgot to show install of the upper seal and basket. I simply tightened that with a small monkey wrench. Then installed the basket and agitator.
 Note to self: Buy the stupid spring compression tool you getting too old to manhandle stuff.  :tickedoff:  :2funny:
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 22, 2011, 02:42:37 PM
Nice JW  O0

Quote
Note to self: Buy the stupid spring compression tool you getting too old to manhandle stuff

Are you talking about this spring tool?

Part # 22002922 (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=93887.1&type=10&tmpid=2111&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252Fpart_details.aspx%253Fpart_id%253D3854720%2526pn_%253D22002922)
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 22, 2011, 03:25:53 PM
YEP
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 22, 2011, 03:38:28 PM
JW,

If you would like I would be happy to send you one for free.
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 22, 2011, 05:14:20 PM
That would be awesome.  O0
One thing I did screw up on was the three spring keepers; had it all together and started to hook them springs and wouldn't ya know I fergot to put em on there before going to the next step. The install is perty idiot proof. You have a nub on the seal so it won't go but one way and the holes to the base only fit one way on the tub otherwise the holes will not line up right.
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 22, 2011, 05:49:56 PM
I should have the spring tool in a few days then I will ship it out to you.
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 22, 2011, 06:27:20 PM
Thanks  O0
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 28, 2011, 08:38:37 AM
i will be mailing you your spring tool today, thanks JW!
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on February 28, 2011, 09:49:30 AM
Cool! I have a maytag in the yard that awaits that tool.
Title: Re: Let me show yall what I been up to today
Post by: krazytech on February 28, 2011, 11:25:11 PM
I was watching a old guy take off the springs.. He used metal electrical boxes slid the boxes inside the springs to keep them stretched out..he used one box for each spring... then when he when to put them back he just slid the spring back into the tub hole... very cool and no pulling on springs...work smarter not harder....
Title: Re: Let me show yall what I been up to today
Post by: AJ on February 28, 2011, 11:46:01 PM
Nice tip!  O0
Title: Re: Let me show yall what I been up to today
Post by: JWWebster on March 02, 2011, 02:18:50 PM
Got the tool. Gonna take some pix when I get around to it. Thanks.
Title: Re: Let me show yall what I been up to today
Post by: AJ on March 02, 2011, 02:53:56 PM
 O0