ApplianceJunk.com

Forum Index => Refrigerator & Freezer Repair => Topic started by: Marvster on August 11, 2007, 07:32:39 PM

Title: Kenmore refrigerator - how remove ice/water dispenser front panel
Post by: Marvster on August 11, 2007, 07:32:39 PM
I need to replace the 'water fitting assembly' in the ice/water dispenser in the freezer door on a side-by-side (model 106.59582990- manufactured circa August 1999).  There is not near enough room to work through the front panel so would like to remove it.  I see no screws.  Is it a snap out (if so, how - bottom/top??) ? Or? ??? ??? ??? ??? ?
 
Thanks in advance for any advice/assistance.........



Refrigerator Water Fitting Assembly Part # 4388152
Title: Re: Kenmore refrigerator - how remove ice/water dispenser front panel
Post by: AJ on August 11, 2007, 08:06:07 PM
Hi Marvster,

Yes, the front panel should just snap off.
If you look under the bottom edge there is often a couple small slots.
Put a flat blade screwdriver in the slot and pop the front off.