ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Jaytag on September 07, 2010, 03:12:17 PM

Title: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: Jaytag on September 07, 2010, 03:12:17 PM
I replaced the timer and the first cycle it went into final spin, the second it did the same thing as old timer...finished with two rinses and no final spin.  Final Spin works fine on the delicate cycle.  The door locks and the light comes on so no door issue.  I thought for sure it was the timer because all you have to do is turn the dial around to final spin and it goes right into the spin.  Any thoughts?

Model 417.40042990
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: JWWebster on September 07, 2010, 04:03:26 PM
Did you check the door switch connection for corrosion?
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: Jaytag on September 07, 2010, 05:29:02 PM
Would the door switch be the issue if you can restart the load on final spin without opening the door?
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: JWWebster on September 07, 2010, 08:53:04 PM
Well the door switch not only locks the door but it tells the control it is locked.
All I am sayin is it might be lockin but it ain't sayin. LOL
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: RegUS_PatOff on September 08, 2010, 05:07:10 AM
when in the Regular Cycle, during "Spin", and the Door is locked ....

IS the Door actually locked ?

Then un-plug Washer from Wall Outlet.

Can you open the Door right away, or only after a few minutes ?


Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: mattlwil on September 19, 2010, 01:09:55 AM
I vote for a spin control board, located the right rear of the machine at the bottom.
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: Jaytag on September 25, 2010, 02:50:05 PM
Can I get a part number for that board.

The door is locked and you cannot open it until like a minute or so after the light goes out.  My neighbor's has the same issue so now I have two to fix.

Thanks
Jay
Title: Re: Kenmorre Tumble Action Washer will not go into final spin on Regular Cycle
Post by: RegUS_PatOff on September 25, 2010, 04:27:55 PM
134149220

click on picture
(http://www.rcappliancepartsimages.com/dbImages/00000921/00278308.jpg) (http://www.repairclinic.com/referral.asp?R=1522&N=1206430)