ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: amnesty on March 04, 2008, 07:46:38 PM

Title: KENMORE WASHER 60 series
Post by: amnesty on March 04, 2008, 07:46:38 PM
 :-\ Well im confused and frustrated with my washer, 110.92060110 (http://www.repairclinic.com/Shop-For-Parts?s=t-110.92060110-%3d%3d). Its old and now it wont spin and rince! I turn the knob manualy and it works on one cycle :o
So, I know it can still rince and spin but it just wont when it sapposed to.
I been using it that way for a fiew months  ;)
However it takes forever and was gonna get a new washer. I dont think I need one, what do you think I can do about fixing mine and were do I get the parts? :D
Thank you for your help with my dryer a fiew months back!
Still works good I fixed it with your help O0

Model 110.92060110
Title: Re: KENMORE WASHER 60 series
Post by: whirlpooltech on March 04, 2008, 07:57:39 PM
Hi amnesty,

Could you check your model number again.
I think it maybe missing some numbers.

Would there maybe be a 110. in front of them other numbers?

Title: Re: KENMORE WASHER 60 series
Post by: JWWebster on March 04, 2008, 10:16:19 PM
110.92060110 add a 110. to any kenmore model number(washers and dryers whirlpool) It is a direct drive model. You say you can make it spin  by manually manipulating the the washer. I hear ya. That has got to be the timer. It will do all the funnctions but you just gotta figure out how. I was leaning on one one time. Literally leaning on the lid and messing with the timer to make one spin. I noticed the lid was loose. It was not catching the striker to the lid switch like it was supposed to.  Is your lid loose? if it ain't  I would say replace the timer.
Title: Re: KENMORE WASHER 60 series
Post by: amnesty on March 06, 2008, 11:38:32 AM
model# 110.92060110 (http://www.repairclinic.com/Shop-For-Parts?s=t-110.92060110-%3d%3d)
here is the whole model # sorry about that.
Title: Re: KENMORE WASHER 60 series
Post by: JWWebster on March 06, 2008, 12:19:00 PM
If you can move the timer around and everything works, then I would say the timer motor is not advancing. You could try oiling it, but it probably needs replacement.
Title: Re: KENMORE WASHER 60 series
Post by: amnesty on March 06, 2008, 12:34:32 PM
So, seen a video an how to get to the timer. Do you have one for kenmore or are they all pretty much the same?
If there is a wideo what video do you recamend?

Im going to try and take a look at my timer today. Also were do I oil it?
Title: Re: KENMORE WASHER 60 series
Post by: JWWebster on March 06, 2008, 02:40:27 PM
http://www.youtube.com/watch?v=IDMrhyEuYwM&feature=related
Title: Re: KENMORE WASHER 60 series
Post by: JWWebster on March 06, 2008, 02:48:23 PM
Once you flip up this console then the timer is easily accessed. The knob unscrews then you remove the dial indicator(escrution) this will expose the 2 5/16th inch hex heads that hold the timer in place. after these 2 are removed the timer simply has a quick disconnect. If you have a credit card you might can send the timer to be rebuilt to midwest timers in Michigan. Midwest Timer Service, Inc.
4815 N. M-63
Benton Harbor, MI 49022-9533
Phone 269-849-2800