ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: tcsever on March 18, 2010, 04:27:09 PM

Title: Kenmore 70 Series won't spin second time
Post by: tcsever on March 18, 2010, 04:27:09 PM
I have a Kenmore 70 series that won't spin after the rinse cycle.  It will spin if it manually turn the dial to spin.  I am confused...not sure why it would spin once but not twice?  Any advice?
Title: Re: Kenmore 70 Series won't spin second time
Post by: JWWebster on March 18, 2010, 05:44:43 PM
Does it do it in all the cycles?
Title: Re: Kenmore 70 Series won't spin second time
Post by: tcsever on March 18, 2010, 07:33:30 PM
Yes, it does it in all the cycles...even if i put it on second rinse.  However, if i push in the knob and turn it manually to spin it works just fine.  It's confusing to me : )
Title: Re: Kenmore 70 Series won't spin second time
Post by: JWWebster on March 18, 2010, 07:57:08 PM
Timer most likely
Title: Re: Kenmore 70 Series won't spin second time
Post by: schaffersapplian on March 18, 2010, 08:02:17 PM
agreed, the timer needs to pause, to kick in the drive tube assy and turn the tub, if the timer does not pause, you will not spin.
Title: Re: Kenmore 70 Series won't spin second time
Post by: tcsever on March 18, 2010, 08:08:44 PM
That's good news...I will check into fixing it.  Thanks for your help!!!!!!