ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: 1gregp on January 03, 2010, 06:22:39 PM

Title: Maytag Neptune but does not spin. Intermittent failure.
Post by: 1gregp on January 03, 2010, 06:22:39 PM
We replaced the R11 resistor, triode and wax motor a few months ago. The washer worked properly after the repair. Recently the washer will complete a cycle without spinning out the water. In all cases the front door is locked (red light is on). This is an intermittent failure that seems to be occurring more frequently. Can you suggest some diagnostics

Model MAH4000
Title: Re: Maytag Neptune but does not spin. Intermittent failure.
Post by: JWWebster on January 03, 2010, 07:45:13 PM
clogged pump/slow drain/kinked drain hose