ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: whirlpool problem on February 12, 2008, 10:31:06 PM

Title: whirlpool washer won't agitate or spin
Post by: whirlpool problem on February 12, 2008, 10:31:06 PM
washer drains but won't agitate or spin and makes a grinding noise.    

Model Number: LSQ9110PW2 icon
Title: Re: whirlpool washer won't spin
Post by: whirlpooltech on February 12, 2008, 10:34:56 PM
Hi,

What is the model number of the washer?
Please modify your first post to include the model number.

Thanks,
Title: Re: whirlpool washer won't agitate or spin
Post by: Repair-man on February 13, 2008, 07:51:25 AM
I believe the LSQ sorta gives it away :)

Try a new drive coupling.
Title: Re: whirlpool washer won't agitate or spin
Post by: whirlpooltech on February 13, 2008, 08:04:38 AM
You can see from the time stamps on the post that he edited his post after I asked him to.
Before he did that the model number was not there.

I believe Repair-man is correct. Check the coupler first.
Title: Re: whirlpool washer won't agitate or spin
Post by: JWWebster on February 13, 2008, 07:52:44 PM
This drive coupling goes between the transmission and the motor and is a piece of cake to fix. The secret is knowing how to remove the cabinet. To do so you need to flip up the control panel and pop the S clips off the body and rear wall. this will allow access to the internal workings. The pump just clips onto the motor ,so remove that first,next the motor just clips to the tranny,remove the motor(I unplug the harness) the little darling will be right there or whats left of it anyway.All ya gots ta do is line up everything and snap that puppy back together. Easier than falling off of a log backwards and not near as complicated. :2funny:
Title: Re: whirlpool washer won't agitate or spin
Post by: whirlpool problem on May 02, 2008, 08:02:22 AM
New drive coupling worked like a charm
Thanks everyone
Title: Re: whirlpool washer won't agitate or spin
Post by: AJ on May 02, 2008, 12:33:26 PM
Glad to hear you got it repaired.

Thanks for the update. .