ApplianceJunk.com

Forum Index => Chit Chat => Topic started by: lcsw on April 06, 2009, 07:42:50 AM

Title: Kitchenaid stand mixer
Post by: lcsw on April 06, 2009, 07:42:50 AM
Hi,

I have a Kitchenaid stand mixer, which I thought was supposed to be a pretty good brand.  It didn't last too long, though.  I'm guessing the problem is the switch because it only runs on high speed.  Nothing happens until the switch gets to the highest setting.

Any ideas on whether it is salvageable?

Thanks.
Title: Re: Kitchenaid stand mixer
Post by: Al Capone on April 06, 2009, 08:16:43 AM
Hi lcsw,

Could you post the model number for us?

Thanks,
Title: Re: Kitchenaid stand mixer
Post by: edlee on April 07, 2009, 02:03:23 PM
I'm not sure about yours, but on mine, the motor that turns the bowl,,,yeah, a separate one,, burned up after about a month of use.

After hours on the net, trying to find the replacement parts site for kitchenaid, I finally found it,, and the part number,, only to be informed that the part was obsolete.

By the way,,, the same mixer is still being sold. 

Some parts are available, but remember,, it's made in China, so the parts may be hard to get shipped correctly.

Good luck,
ed