ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: honer on March 12, 2009, 03:54:50 PM

Title: Kenmore Dishwasher motor & pump removal
Post by: honer on March 12, 2009, 03:54:50 PM
Dishwasher won't run and I can't turn the chopper by hand so I assume I have to replace the motor.  Could you please tell me how to replace the motor and pump assembly on this dishwasher?
Honer

Model 665.17052400
Title: Re: Kenmore Dishwasher motor & pump removal
Post by: Repair-man on March 12, 2009, 04:47:00 PM
Look in the Whirlpool forum for some of the dishwasher manuals to help you here. We can help with the diagnostic, but you are past that. Since our parts guys don't ship to Canada, you might start looking for the new pump assembly with some of your local sources. You'll find that the instructions are usually included in most repair parts like this.
Title: Re: Kenmore Dishwasher motor & pump removal
Post by: Kayakcrzy on March 15, 2009, 09:04:47 AM
Look in the Whirlpool forum for some of the dishwasher manuals to help you here. We can help with the diagnostic, but you are past that. Since our parts guys don't ship to Canada, you might start looking for the new pump assembly with some of your local sources. You'll find that the instructions are usually included in most repair parts like this.

You will have to pull the dishwasher out, of its space, lay it on its back, and replace it, Then reinstall it.   Tom  www.applianceeducator.com/parts,htm