ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: HORN 34 on February 21, 2009, 01:11:29 PM

Title: kenmore washer series 70 model 110.20702990 won,t drain
Post by: HORN 34 on February 21, 2009, 01:11:29 PM
motor coupler just replaced got it agitating would,not drain replaced pump timer cycles to before rinse clicks and no pumping also wont spin with lid up and switch held down timer lid or what else checked hoses thanks

Model 110.20702990
Title: Re: won,t drain
Post by: JWWebster on February 21, 2009, 01:22:44 PM
Did you plug in the lid switch?
Title: Re: kenmore washer series 70 model 110.20702990 won,t drain
Post by: optimum appliance on December 05, 2014, 12:12:20 PM
You can bypass the lid switch by locating the connector, there are 3 wires on the connector, put jumper on the 2 wires but not the green, if the washer go on spin that mean the switch is bad.
Title: Re: kenmore washer series 70 model 110.20702990 won,t drain
Post by: Washaman on December 09, 2014, 12:04:55 AM
Yes. Bypass it with a wire nut or butt connecter.


Sent from my iPhone using Tapatalk