ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Boo on January 28, 2009, 10:34:53 AM

Title: Frigidaire Front Load Washer
Post by: Boo on January 28, 2009, 10:34:53 AM
Washer tub will not turn or spin. I found an electrical componet had fallen off the Spin Control Module, Frigidaire Part #134285700. The componet is a small black two prong part about the size and shape of a nickel, it has markings NTC 2.5 0328. I soldered it back on and the washer worked fine for two days then went out again. Checked the componet and the solder had melted again. Can't get it to work now. I think I need a new Spin Control Module but am not sure if it could be something further back in the circuitry causing the problem and I might be wasting money??

Mike.

Model FWT645RHS0
Title: Re: Frigidaire Front Load Washer
Post by: Mr. Fix-It on January 28, 2009, 12:31:01 PM
That part is a capacitor and it probably fell out because it overheated. You need a new speed control module.