ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Thorning on May 02, 2021, 09:00:52 AM

Title: Maytag washer top load model LAT8035AAM
Post by: Thorning on May 02, 2021, 09:00:52 AM
The above model washer  was given to me with the caution that it might need some repair.    I dismantled the unit and found no problems in the drive area and no leaks or noise when running.  I did note one item that needs clarification in the internal parts.
Specifically the fabric dispenser on the top of the center shaft agitator has an open hole on the bottom.  The hole is about 3/8 " diameter. My question to other techs . Should this have a button in it or some other type of closure ? Any info would be appreciated.
Title: Re: Maytag washer top load model LAT8035AAM
Post by: theoldstoveguy on May 03, 2021, 10:02:30 PM
It's missing the cup insert that sits inside the agitator.