ApplianceJunk.com

Forum Index => Miscellaneous Topics => Topic started by: Matzie66 on June 09, 2020, 06:30:36 PM

Title: GE fridge model# PFE28PSKDSS
Post by: Matzie66 on June 09, 2020, 06:30:36 PM
 Main control # WR5530806 was replaced. Only condenser fan will run. Does this control board need
programming? Thanks
Title: Re: GE fridge model# PFE28PSKDSS
Post by: dab147315 on June 10, 2020, 09:48:38 AM
Board does not did to be program.Something maybe loading down the DC voltage. Alot of problems with the fresh food fan motor.Unplug it and see if the other loads come back to life. If not that fan start by unplugging the other DC loads on the board one at a time.Main thing check for codes. you should be able to run each fan motor through diagnostic unless it is a Non-dispenser Model.
Title: Re: GE fridge model# PFE28PSKDSS
Post by: Matzie66 on June 11, 2020, 06:04:13 PM
Hi
    Unable to get fridge into service mode. I find that when something doesn,t enter service mode problem is usually with
main control board which in this case would be a faulty new board. Could the dispenser board be bad?
Title: Re: GE fridge model# PFE28PSKDSS
Post by: Matzie66 on June 19, 2020, 06:02:50 PM
Hi
   Fridge won,t go into service diagnostics mode. Any suggestions? No error codes ever displayed.