ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Lcont01 on October 28, 2019, 05:04:33 PM

Title: New control board now wont wash
Post by: Lcont01 on October 28, 2019, 05:04:33 PM
I have a ge front load machine I replace the control board because I could not do anything I had like 2 cycle that were selectable and the power and start buttons were totally random when they worked. But when it started it ran. I replaced the control panel and now the buttons all work but the load starts begins to fill with water then stops filling drains and turns off. Is there anything I can do or do I just have to return the control board?
Title: Re: New control board now wont wash
Post by: Blaiser on November 13, 2019, 07:43:25 AM
Please post Model number without that itís hard to diagnosis

Title: Re: New control board now wont wash
Post by: scrapiron on November 13, 2019, 10:03:12 PM
Most of the controls for the front load Ge washers need to be programmed in order to function. Did the board come with programming instructions? If not, follow Blaiser's suggestion and post the model number.