ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: mdniswan50 on July 27, 2019, 06:51:55 PM

Title: GE leaving a lot of water after wash.GSD3360D35SS
Post by: mdniswan50 on July 27, 2019, 06:51:55 PM
I replaced impeller kit, solenoid motor timer.Have not replace pump or float.Washing dishes great.Leaving bottom full of water..Drain OK.Clean inside.
Title: Re: GE leaving a lot of water after wash.GSD3360D35SS
Post by: manden on July 28, 2019, 10:13:09 AM
The pump should be OK if it is washing dishes OK.
The float does not effect the pump out it is just an overfill safety.

How do you know that the drain is OK?
Did you try to drain it into a pail etc.
Often the drain get plugged where the drain hose connects to the house plumbing.

Below is a link to a tech manual for GE water distribution perhaps it will be useful to you.
https://drive.google.com/file/d/0BzIiBNwRIV4NVVlGYk10cWpHQVk/view
Title: Re: GE leaving a lot of water after wash.GSD3360D35SS
Post by: mdniswan50 on July 28, 2019, 02:19:43 PM
Drain hose clean not hook up to house.maybe new solenoid is defective I hear kick in.