ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: hdtrc on June 21, 2019, 05:39:52 AM

Title: Whirlpool LSB6200PQ2 Agitated, now won't spin.
Post by: hdtrc on June 21, 2019, 05:39:52 AM
Hello,

   A load of laundry was run and the agitation was heard but then once it was time to drain the tub, nothing but a hum.
Now, no matter where I put the dial, all that I get is a hum.

   Any thoughts ?

Ed
Title: Re: Whirlpool LSB6200PQ2 Agitated, now won't spin.
Post by: Caddy4343 on June 21, 2019, 07:41:39 AM
Try removing the pump and then put it on spin.  If it spins then the pump is either jammed or bad.  If it still just hums then it's most likely the motor.
Title: Re: Whirlpool LSB6200PQ2 Agitated, now won't spin.
Post by: hdtrc on June 21, 2019, 07:43:41 AM
Ok, will do.
Title: Re: Whirlpool LSB6200PQ2 Agitated, now won't spin.
Post by: luck on June 23, 2019, 09:55:26 AM
if the motor has a capacitor mounted to it  make sure a wire didn't fall out off
Title: Re: Whirlpool LSB6200PQ2 Agitated, now won't spin.
Post by: hdtrc on June 27, 2019, 05:47:55 AM
I found a sock stuck in the pump.
Such an easy machine to work on.