ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: mdniswan50 on March 16, 2019, 12:39:09 PM

Title: GE Dishwasher leaving water bottom after wash ADW1000K00W
Post by: mdniswan50 on March 16, 2019, 12:39:09 PM
I changed impeller kit and seal.also sump.I clean everything.Pump may be weak?
Title: Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
Post by: Bearcat on March 17, 2019, 05:35:56 AM
Sound to me like you are missing the check ball, or itís installed incorrectly.  The part number if you need one is WD12X10408.

Write back, on how things turn out.

Bearcat
Title: Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
Post by: mdniswan50 on March 17, 2019, 07:21:34 AM
Is the ball under spray arm.Just pull spray arm off,No tools needed?I order the ball already.I will let you know.
Title: Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
Post by: dab147315 on March 17, 2019, 09:29:22 AM
That model does not uses that check ball!   Check to see if the water is slowing draining into the sink after it starts to wash!     Also is it getting enough water in the fill cycle!  This model uses the weight of the water to keep that flapper open after the drain solenoid is energized.
Title: Re: GE Dishwasher leaving water bottom after wash ADW1000K00W
Post by: mdniswan50 on March 17, 2019, 02:37:29 PM
I am testing out side with water hose.