ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: a3kbrisk on October 31, 2008, 10:46:35 AM

Title: Maytag Pump Pully
Post by: a3kbrisk on October 31, 2008, 10:46:35 AM
My washer stopped spinning. I looked under the unit and the belt was in tact, but was off. The unit has a three pulley system with one belt.  However, the pulley under the Pump was completely gone, there was a round melted plastic piece under the unit. Do I have to replace the whole pump? Is this a bigger problem than meets the eye? The machine is 3 years old. I also cant get the front cover off, no screws, just 2 clips under front cover. No manual online.

Model MAV3955EWW
Title: Re: Maytag PumpPully
Post by: RegUS_PatOff on October 31, 2008, 11:59:53 AM
click on picture
(http://www.repairclinic.com/dbImages/00000920/00278272.jpg) (http://www.repairclinic.com/referral.asp?R=1522&N=1159259)

MAV3955EWW Service Manual (http://www.servicematters.com/maytag_library/docs/16026502.pdf)