ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: shillion on August 23, 2018, 04:56:24 AM

Title: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
Post by: shillion on August 23, 2018, 04:56:24 AM
My customer has this dw,after finishing each cycle,displays E09 code.Before starting any cycle,he has to turn off the on/off switch,turn on again, the E09 code is gone.Then it would run ext cycle fine.What does E09 mean?please help!
Title: Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
Post by: dab147315 on August 23, 2018, 08:26:44 AM
Bosch Dishwasher Error Codes
Title: Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
Post by: shillion on August 24, 2018, 03:01:54 AM
Thank you very much dab ,with these fault codes,I have confidence to tacke this repair now.
Title: Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
Post by: rkious1 on February 16, 2019, 05:27:56 PM
How did this one turn out ?

1. Heater
2. Circuit Board
3. Wiring Harness

Have not had the joy to work on this mod. yet and this inquiring mind was just wanting to know  :popcorn:
Title: Re: Bosch dishwasher SHE7ER55UC/50 CODE E09,After finished cycle
Post by: shillion on February 17, 2019, 10:35:55 AM
I had to replace the wash pump with the heater (the heat pump),Just as the fault code description said.