ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: haroldsappliance on June 23, 2018, 05:25:27 AM

Title: GE Dishwasher model number gdf510pmd4s4
Post by: haroldsappliance on June 23, 2018, 05:25:27 AM
GE Dishwasher model number gdf510pmd4s4. Looking for tech sheet for Diagnostic entry. Dishwashers heat system not working buy metal open. apparently more problems than that.  :thanks:
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: dab147315 on June 23, 2018, 07:57:20 AM
GDF510PMD4SA Think its this model but don't have that one.
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: haroldsappliance on June 23, 2018, 08:43:06 AM
Thanks for looking anyway
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: dab147315 on June 23, 2018, 08:47:07 AM
31-30701 GE Mini Manual  For a GDF510PMD4SA      Anybody have this mini manual. Sears pull up this at there site. Please help.
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: olyteddy on June 23, 2018, 08:10:55 PM
Probably pretty much the same as any GDF machine: hold "Start" and "Cycle Select" for 10 seconds to enter, after error code(s) are displayed hold "Select" for 5 seconds. Should cause a single LED to flash once per second. Use "Select" to advance to 4 flashes. 4 blinks is the heater one. Press "Start" and heater should activate.
(almost) any of the GDF-GDT dishwasher manuals should work for this one.
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: olyteddy on June 23, 2018, 08:16:44 PM
Try this one:
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: haroldsappliance on June 24, 2018, 03:28:55 AM
Thanks to both of you guys.
Title: Re: GE Dishwasher model number gdf510pmd4s4
Post by: haroldsappliance on June 26, 2018, 05:30:50 AM
Yo, just a little update on that dishwasher that wasn't Heating. I never did put it in a diagnostic mode because I didn't get that information until after I was done, but what I done was pull the wiring off the main control board and look for any sign of a discoloration or burn which I did not find put it all back together remove the thermostat that was open and I'm still thinking that part may be bad but it closed and I put it all back together and had 220 volts during the heating cycle that I did not have before. OneNote also I've had this several times on this particular model where the unit did not respond to any command. Disrupted power to the unit for a couple minutes and it restored all function with no call back's. Thanks again guys.