ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: baxleyk1 on October 21, 2007, 08:08:04 PM

Title: Whirlpool Dishwasher GU2400XTPS6 dead?
Post by: baxleyk1 on October 21, 2007, 08:08:04 PM
Hi!  First post here... My Whirlpool dishwasher won't start. When I try the diagnostic cycle, it cycles through fine, then once the diagnostic is done, it still won't start. It shows the two dashes in the display indicating a door problem; I took it apart and couldn't find anything obviously wrong with the latch or other door components. I even cleaned the micro switch contacts with no results. Any ideas?

Model Number: GU2400XTPS6 icon
Title: Re: Whirlpool Dishwasher GU2400XTPS6 dead?
Post by: Pegi on October 21, 2007, 08:22:08 PM
It shows the two dashes in the display indicating a door problem

check your door switches... :)
Title: Re: Whirlpool Dishwasher GU2400XTPS6 dead?
Post by: Pegi on October 21, 2007, 08:30:49 PM
TECH SHEET (http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208535451.pdf)
Title: Re: Whirlpool Dishwasher GU2400XTPS6 dead?
Post by: rickgburton on October 22, 2007, 10:15:40 PM
Check both switches using an ohm meter. There is also a thermal electronic fuse behind the control panel you should check.
Door Switch # 8269209 (2)
Thermal fuse # 8269213