ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: app1 on April 21, 2017, 08:49:52 AM

Title: No Hot Water
Post by: app1 on April 21, 2017, 08:49:52 AM
Have a Whirlpool washer Model # WTW5560SQO and we can only get hot water - bad water valve or temperature switch is my guess and is there a way to test the temp switch? Thanks for any help!!!!!
Title: Re: No Hot Water
Post by: app1 on April 21, 2017, 08:51:22 AM
Sorry , I meant to say we only get Cold Water!!! I'm sorry!
Title: Re: No Hot Water
Post by: vunger1 on April 22, 2017, 05:42:53 PM
Check for 120vac at the Hot water valve should be a red wire and a white wire, if you have voltage then bad valve
Title: Re: No Hot Water
Post by: app1 on April 27, 2017, 01:13:09 PM
Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.
Title: Re: No Hot Water
Post by: RufusFer on April 28, 2017, 11:04:53 AM
Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.

Same problem here, how do you change the temp switch up?
Title: Re: No Hot Water
Post by: rubyatiy on January 14, 2019, 06:42:14 AM
Sorry it took so long to respond but thanks for the advice. It turned out to be the temp switch!! All is well now.

Same problem here, how do you change the temp switch up?

Check the main forum page you will get your answers cheers
Title: Re: No Hot Water
Post by: bathmate28 on February 16, 2019, 10:07:06 AM
i think this is very interesting discussion . thanks
Bathmate Hydro Pump (https://bathmatesolution.com/)