ApplianceJunk.com

Forum Index => Dryer Repair => Topic started by: airbendr on April 11, 2017, 04:59:23 PM

Title: Dryer error code E61 after replacing heating element
Post by: airbendr on April 11, 2017, 04:59:23 PM
 :(
replaced heater Frigidair fase7073nwo

unit codes out about 5 minutes ,, does work on low heat.
Title: Re: Dryer error code E61 after replacing heating element
Post by: dab147315 on April 11, 2017, 08:46:14 PM
http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=+fase7073nw0&User=&Search=Search (http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=+fase7073nw0&User=&Search=Search)
I guess you know you can get information from this site. http://b2b.frigidaire.com/support/manuals.asp?NewSearch=New+Search (http://b2b.frigidaire.com/support/manuals.asp?NewSearch=New+Search)
Model is for FASE7073NW0   
Title: Re: Dryer error code E61 after replacing heating element
Post by: airbendr on April 11, 2017, 09:12:12 PM
 :thanks:  dab147315

printed it  ;D hoping some one would say Oh yeah this happens all the time, just do this,,,,,

oh wait that's what the tek sheets for  ;)
k
Title: Re: Dryer error code E61 after replacing heating element
Post by: dab147315 on April 11, 2017, 10:30:15 PM
134792700 (https://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252Ffrigidaire-heater-134792700-ap4368653.html)  Three coils in the heating element as you know and if all the wiring is good you are probably looking at a control board. FYI most of the time there is a wiring diagram on the last page of the parts list on these  Frigidaire look ups.
Title: Re: Dryer error code E61 after replacing heating element
Post by: dab147315 on April 16, 2017, 08:45:26 AM
Any update?