ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Maury on October 02, 2008, 02:49:11 PM

Title: WHIRLPOOL WASHER STOPPED DRAINING
Post by: Maury on October 02, 2008, 02:49:11 PM
THE WASHER FILLED AND AGITATED, THEN STOPPED WHEN IT CAME TIME FOR DRAIN/SPIN.  I DON'T THINK I HEAR THE TIMER, EITHER.  CAN YOU HELP ME REPAIR IT?

Model Number: LSQ564J icon
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: Repair-man on October 02, 2008, 04:28:32 PM
Maury;

It sounds from here like a bad lid switch. There are several topics on this forum which already explain how to correct this. A cheap and easy repair for you.
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: JWWebster on October 02, 2008, 04:53:25 PM
unplug this lid switch and check for continuity with lid shut. If open replace switch.This switch can be temporarily jumped.
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: frankton on October 04, 2008, 07:29:50 PM
unplug this lid switch and check for continuity with lid shut. If open replace switch.This switch can be temporarily jumped.

I stopped once before but I fixed it. It was the lid switch. This time the lid switch looks intact but it stops at the part where it should drain water and it makes a humming clicking noise.

Help me Obiwan

Chip
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: JWWebster on October 05, 2008, 09:48:18 AM
http://repair2000.com/coupling.html
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: Al Capone on October 05, 2008, 10:40:48 AM
http://appliancejunk.com/motorcoupler.pdf
Title: Re: WHIRLPOOL WASHER STOPPED DRAINING
Post by: JWWebster on October 05, 2008, 03:00:55 PM
good PDF Al