ApplianceJunk.com

Forum Index => Refrigerator & Freezer Repair => Topic started by: Marvster on October 08, 2007, 04:02:11 PM

Title: How remove Kenmore ice/water dispenser housing ??
Post by: Marvster on October 08, 2007, 04:02:11 PM
I need to replace water dispenser 'spout' - it has delivery tube attached.  Have removed front panel and housing screws - housing appears to be glued or taped - prying not very effective.  Is there a safe way to dislodge the housing from the door.  Kenmore side-by-side 106.595829902.
 
Thanks in advance for any advice offered.........
Title: Re: How remove Kenmore ice/water dispenser housing ??
Post by: AJ on October 09, 2007, 07:35:32 AM
delivery tube?
Do you have a part number?

If this the tube that runs inside the freezer door?
If so the ones I have replaced all I did was remove the trim to get some extra room.
The tube should just pull in and out of the door.