ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: brad on December 09, 2014, 02:35:46 PM

Title: Maytag MVWC400XW washer
Post by: brad on December 09, 2014, 02:35:46 PM
Am having trouble with this Maytag MVWC400XW washer.When you load it and start the cycle it locks the lid and fills and washers,but when it gets to the rinse it just clicks and clicks from underneath it.You have to manualy advance it or it won't continue,just clicks.Can you help me with the repair of this washer?
Title: Re: Maytag MVWC400XW washer
Post by: domain on December 09, 2014, 05:03:14 PM
Sounds as if it is having touble shifting. Either shifter or splutch assy
Title: Re: Maytag MVWC400XW washer
Post by: AJ on December 09, 2014, 05:30:54 PM
Service manual...
https://drive.google.com/open?id=0BzIiBNwRIV4NZ2ZwR0tlb0VCN3c&authuser=0

Title: Re: Maytag MVWC400XW washer
Post by: brad on December 09, 2014, 07:25:38 PM
Thank you for the reply and the help.Thanks again
Title: Re: Maytag MVWC400XW washer
Post by: AJ on December 09, 2014, 07:27:26 PM
Please let us know what you find or if you have any other questions.
Title: Re: Maytag MVWC400XW washer
Post by: brad on December 10, 2014, 08:36:02 AM
When I change either the shifter or the splutch do I have to go thru that calibration thing?
Title: Re: Maytag MVWC400XW washer
Post by: LowSL2 on December 10, 2014, 08:58:00 AM
Yes. Calibrate any time you do any type of service to the machine
Title: Re: Maytag MVWC400XW washer
Post by: brad on December 10, 2014, 09:22:51 AM
Ok thank you