ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: B52 on July 29, 2014, 05:42:07 PM

Title: Electrolux Dishwasher - EIDW6105GS1 - Heater
Post by: B52 on July 29, 2014, 05:42:07 PM
I have a Electrolux dishwasher, model EIDW6105GS1.  The washer was not heating properly, so a new inline heater was installed.  However, the water is still mildly warm, even when I run sanitize or the hi temp cycle.  I am wondering if the electrical leads to the inline heater terminals were installed wrong.  Can an appliance technician that has worked on this model tell me which terminal the red wire should go to and which the white?  Do you have a picture?

Thank you very much for your help.