ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: jstoki1 on November 26, 2013, 04:18:09 PM

Title: Kenmore 400 series washer filling problems
Post by: jstoki1 on November 26, 2013, 04:18:09 PM
Hi there.
I'm having problems with my washer filling.  It will start out fine and then after about 30sec. Water will trickle out. It takes forever to wash one load. What could it be.
Title: Re: Kenmore 400 series washer filling problems
Post by: dab147315 on November 26, 2013, 05:08:44 PM
Need to post compete model number.
Title: Re: Kenmore 400 series washer filling problems
Post by: theoldstoveguy on November 26, 2013, 06:09:49 PM
Sounds like a house water pressure issue. Turn off water and remove the fill hose ( check both this way) from the back of the machine. Put end of hose in drain pipe and turn on ,if pressure drops it's your household pressure.
Title: Re: Kenmore 400 series washer filling problems
Post by: schleven on November 26, 2013, 09:47:50 PM
Might have those goofy flow safe hoses.
Those do that sometimes.
Title: Re: Kenmore 400 series washer filling problems
Post by: dab147315 on November 27, 2013, 10:07:41 AM
Yeah those hoses can be a problem. I would not use them on today's washers.