ApplianceJunk.com

Forum Index => Range, Oven & Cooktop Repair => Topic started by: leoneleven on July 25, 2013, 06:12:16 AM

Title: whirpool akzm 794 problem
Post by: leoneleven on July 25, 2013, 06:12:16 AM
I have a problem with a whirlpool oven, model akzm 794. When turned on it starts to heat itself without any command and keeps on heating. This behavior started after it got blocked in pyro self cleaning. At the time i unplugged it and waited to cool down. I restarted it and functioned properly for some time and without any change in use it started the behavior mentioned above
How can i return it to the normal service?
Title: Re: whirpool akzm 794 problem
Post by: tgoods on July 25, 2013, 08:39:07 PM
It sounds like a stuck relay on the control board.  Either replace the control board or solder in a new relay.
Title: Re: whirpool akzm 794 problem
Post by: leoneleven on July 26, 2013, 07:44:28 AM
i got some info that the problem could be resolved by restarting the board. any ideea howto?