ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: Patricio on January 28, 2013, 09:27:58 AM

Title: GE washer fills & drains, no agitation
Post by: Patricio on January 28, 2013, 09:27:58 AM
GE washer fills, drains not much else.  Suggestions?
Title: Re: GE washer fills & drains, no agitation
Post by: AJ on January 28, 2013, 09:44:20 AM
Model number?
Title: Re: GE washer fills & drains, no agitation
Post by: Patricio on January 28, 2013, 11:53:41 PM
My Bad, was in a hurry.   GE: WJRE 5550 K2WW
Title: Re: GE washer fills & drains, no agitation
Post by: fairbank56 on January 29, 2013, 08:36:26 AM

  Remove front panel and check flashing green LED on top right side of motor inverter board which will give any error codes. A steady 1 second on/off flash while in standby indicates no errors. If no errors, check lid switch.

Eric
Title: Re: GE washer fills & drains, no agitation
Post by: AJ on January 29, 2013, 08:45:31 AM
(http://appliancejunk.com/forums/index.php?action=dlattach;topic=9338.0;attach=5232)
Title: Re: GE washer fills & drains, no agitation
Post by: Patricio on January 29, 2013, 09:54:43 AM
Already checked lid switch at motor plug, lid closed-120v lid open-0v.   No LED light illuminated on motor.  Seems I have continuity from motor plug (RW) (thermal fuse?) to line filter neutral.   How can I test control board?  diagnostic all lights working as should.  Way to test motor to verify bad?
Title: Re: GE washer fills & drains, no agitation
Post by: LowSL2 on January 29, 2013, 11:02:18 AM
RB to WR should have 120v at all times. O to WR should have 120v with lid closed. RB to hot side of power cord should have continuity. If you have power to the motor, but no blinking light, the motor is bad.

Sent from my DROID BIONIC using Tapatalk 2