ApplianceJunk.com

Forum Index => Heating & Air Conditioning Repair (HVAC) => Topic started by: MrsTor on November 30, 2012, 09:19:02 PM

Title: 5 Brick Ventless Heater
Post by: MrsTor on November 30, 2012, 09:19:02 PM
I bought a new 5 brick ventless heater two years ago and just now got around to having it hooked up.  It works great on low and medium.  But when turned on high, where all 5 bricks are lit up... it works fine for about 3or 4 minutes, then shuts off.... pilot light goes out.  It relights just fine.

It doesn't do this on low or medium, just when turned on high.   Is it an oxygen flow problem?  Or a heat sensor?   

Any advice and/or help is greatly appreciated.

Thanks
MrsTor
Title: Re: 5 Brick Ventless Heater
Post by: JWWebster on November 30, 2012, 09:56:14 PM
The most common thing is lint and dust buildup during warm months on these. Blow it out
Title: Re: 5 Brick Ventless Heater
Post by: JWWebster on November 30, 2012, 09:57:13 PM
VENT FREE FIX (http://appliancejunk.blogspot.com/search?q=vent)
Title: Re: 5 Brick Ventless Heater
Post by: MrsTor on December 01, 2012, 08:00:48 AM
Thank you JW .... will try that !!

 :thanks: