ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: tprox on July 31, 2012, 02:20:17 PM

Title: W/p Washer WFW9200SQ00
Post by: tprox on July 31, 2012, 02:20:17 PM
Grinding noise coming from behind the soap dispensor, and no water coming in the washer, hot or cold????Do i have 2 problems or just one? ??? :tickedoff:

WFW9200SQ00
Title: Re: W/p Washer WFW9200SQ00
Post by: haroldsappliance on July 31, 2012, 06:49:44 PM
Take the top cover off and find out where that sound is coming from.
Title: Re: W/p Washer WFW9200SQ00
Post by: tprox on August 01, 2012, 08:28:18 AM







W/p Washer WFW9200SQ00
 
on: July 31, 2012, 02:20:17 PM
 
Quote
 

Grinding noise coming from behind the soap dispensor

Title: Re: W/p Washer WFW9200SQ00
Post by: AJ on August 01, 2012, 08:43:08 AM
#10 in this diagram (http://click.linksynergy.com/fs-bin/click?id=omv7WULuxaw&subid=0&offerid=225193.1&type=10&tmpid=2111&RD_PARM0=http%253A%252F%252Fwww.appliancepartspros.com%252Fpartsearch%252Fmodel.aspx%253Fmodel_id%253D5163972%2526diagram_id%253D29378548&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252Fpartsearch%252Fmodel.aspx%253Fmodel_id%253D5163972%2526diagram_id%253D29378548) is what could be making the noise.

To gain access to that part simply remove the top of the washer as Harold said.

It's part # W10352973

Quote
Grinding noise coming from behind the soap dispensor, and no water coming in the washer, hot or cold????Do i have 2 problems or just one?

Could just be one problem, water runs through the dispenser to enter the machine.

Let us know what you find or if you have any more questions.

Thanks for posting.


Title: Re: W/p Washer WFW9200SQ00
Post by: tprox on August 01, 2012, 11:25:39 AM
AJ thank you for your response. I pulled out the dispensor and it was full of soap/fabric softner. Just gave it a good cleaning and put back together
and works GREAT. It was the little arm that was making the noise
Title: Re: W/p Washer WFW9200SQ00
Post by: AJ on August 01, 2012, 01:35:05 PM
Cool, thanks for the update.  O0