ApplianceJunk.com

Forum Index => Washer Repair => Topic started by: rbrackin@cfl.rr.com on July 04, 2012, 11:27:39 AM

Title: FRigidaire Front Loader Washer FWT445GES1 installation
Post by: rbrackin@cfl.rr.com on July 04, 2012, 11:27:39 AM
Installing a Frigidaire Front Loader Washer FWT445GES1 without the installation manual.  I need to know where to hook up the hot and cold water lines to the side of the washer.  The hose connections on the washer are not marked.  Which hose connector on the side of the washer do I hook the hot and cold water lines to?
Title: Re: FRigidaire Front Loader Washer FWT445GES1 installation
Post by: JWWebster on July 04, 2012, 11:50:31 AM
HOT and COLD water inlet hoses are color coded
for identification. The HOT inlet hose is marked
with a RED band and the COLD inlet hose is
marked with a BLUE band.


http://www.emaservicetips.com/pdfs/575_Electrolux_Washer_Front_Load__5995523536.pdf (http://www.emaservicetips.com/pdfs/575_Electrolux_Washer_Front_Load__5995523536.pdf)
Title: Re: FRigidaire Front Loader Washer FWT445GES1 installation
Post by: JWWebster on July 04, 2012, 11:53:55 AM
If that ain't it look on Fearless Leader's excellent blog page:
http://appliancejunk.com/blog/2010/02/02/frigidaire-appliance-repair-service-manuals/