ApplianceJunk.com

Forum Index => Dishwasher Repair => Topic started by: trevorstorey on June 23, 2012, 09:27:20 PM

Title: Bosch Dishwasher
Post by: trevorstorey on June 23, 2012, 09:27:20 PM
Hi there,

I'm trying to figure out a Bosh Dishwasher Mod: SHE43M05UC/50 no fill problem.

When turned on the unit immediately begins circulating the existing soapy water from the bottom spray arm with low pressure.  The fill valve is clean, clear, and getting voltage.  I took the side panels off to view the fill/drain/float assembly and ran the unit, it is clear that there is no water entering the fill hose, float assemply or dishwasher cabinet nor through the rinse pump.  The timer counts down and it only circulates the existing water.  Also, the detergent dispenser will not open either.

It appear to be stuck in this circulation mode.  Any suggestions?

Also, does anyone know of a good place to purchase service manuals?  I tried servicemanuals.net for this Bosh dishwasher model but found no hits.  I'm a new tech and am looking for a good service manual source (even if I have to pay a bit).

Thanks I appreciate the help!
Title: Re: Bosch Dishwasher
Post by: AJ on June 23, 2012, 09:33:40 PM
Hi,

Quote
I'm a new tech and am looking for a good service manual source (even if I have to pay a bit).

Check out our Service Manual Collection DVD/CD
http://appliancejunk.com/forums/index.php?action=store;sa=view;id=118 (http://appliancejunk.com/forums/index.php?action=store;sa=view;id=118)

I don't have any experience with Bosh dishwashers, so I will let another member answer this one.